How to Make a Hair Claw in Urrykid? Total Process Answer!

A hair claw, as we all know, consists of two acetate/acrylic cards and one spring buckle. However, how can we create the tiny item and color it? You’ll probably know more after reading this essay, in my opinion.

Step 1: Using computer design software, we will create reasonable and appropriate design drawings for production based on your design drawings. Years of prior hairpin job experience are necessary for this. Find spots that are unreasonable and change them.

Step 2: Pick the required color of acetate board and cut it. We provide more than 1000 different acetate color options. For an acetate hairpin color card, get in touch with us.

For precision cutting, enter the design drawing into the CNC engraving machine. is able to engrave your logo. We will employ a variety of knife sizes depending on the needs of the customer. There are knives with straight ends and knives with rounded ends. based on thickness: 0, 5, and 3 millimeters

Step 3: When we reach the acrylic or acetate hair claw card that has been cut. Then, finalizing will be our next task. Place the personalized mold over the acetate card, then use the air press to form it. Usually, this takes 10 seconds. The time will not vary depending on the material’s hardness. In most cases, the acetic acid substance sets in 10 seconds. It takes 15 seconds for acrylic. With enough time, the standard of shape can only be assured.

Fourth step: affix the spring buckle. The spring buckle is made of three different types of materials: ABS, plastic, and acetate. Different spring buckles must be utilized depending on how different materials must be combined. Acetic acid spring buckles must be utilized with the acetic acid substance, and the glue is also different. Acetone is used to fuse acetic acid. Methylene chloride and acrylic must be fused together. It will fall off and break if it is used improperly. Additionally, their prices differ. Due to financial constraints, many makers of hair clips use inexpensive spring clips. resulting in hairpins of inferior grade. Poor customer service is provided.

Spraying ecologically friendly paint is step five. when the hairpin surface is cleaned. Hairpins need to be spray painted. The hairpin surface can be made brighter using spray paint, which also forms a paint surface to preserve the hairpin and is simple to clean. Better quality is felt.

We utilize paint that has undergone testing for environmental protection and is environmentally friendly. It takes at least two minutes to spray paint. 8 layers of paint. We frequently employ gloss paint. We can also provide you matte paint if that’s what you desire.

Step 6: Spring steel, which has good flexibility, is the material used to make the metal spring. Options for gold and silver can be offered through ecologically friendly electroplating. If you use color protection, it is guaranteed not to fade for 8–10 months under normal conditions.

Many hairpin manufacturers employ inexpensive springs, which are only usable for three to four months before deteriorating.

Step 7: Individualize and customise the color of your hairpin logo

White angel wings have been painted on the new design. To guarantee the consistency of the lines and the right hue, we employ artificial coloring. The workforce is put to the test in this business. It will take a long time if you are not a skilled craftsman, and the hairpin logo won’t be attractive. When the paint has dried for about 3 minutes and is hard, the workers will use thinner (alcohol) to remove any extra paint. Designing your own personalized hair clips is a lot of fun because you may use your favorite designs and colors. It has a very distinctive design that appeals to customers.

Find the rhinestones in step eight. Rhinestones come in a variety of pricing ranges, including Swarovski, Czech, and rhinestone diamonds. drill for glass.

The cost may differ by five to ten times. Rhinestone drills and Czech drills are what we typically employ.

We employ an ultrasonic spot drilling equipment, which is installed one by one by staff members without the use of glue.

Step 9: Following the completion of the production process, a skilled quality inspection team will conduct sampling inspections. They will check the samples for extrusion resistance, hot melt, light transmittance, and other indicators.

Update cookies preferences
Scroll to Top